Model Reports 8 min read Updated 13 Jul 2026

Mitsubishi Outlander 2007: reliability & common MOT faults

On the 2007 Mitsubishi Outlander, MOT failures for Sub-frame (rear) and Ball joint (front) show up more often than on similar cars of the same age and mileage. Figures come from UK DVSA open data for tests in 2025 (350 failed first-attempt tests). Figures are among first-attempt failed MOT tests, not among all tests.

Sample

350 failed first-attempt tests · 747 first tests (test year 2025)

Standout pattern

Sub-frame (rear) — about 13× more often than on similar cars.

What to check

  • Sub-frame (rear) — about 13× more often than similar cars
  • Ball joint (front) — about 2.8× more often than similar cars
  • Track rod end (front) — about 2.7× more often than similar cars

Common faults

Failure patterns that show up more often on this registration year than on similar cars.

These MOT failure patterns show up more often on this registration year than on similar cars of the same class, age, and mileage.

Based on 350 failed first-attempt tests in 2025.

Sub-frame (rear)

This failure pattern appears about 13× more often than on similar cars — recorded on 21 failed first-attempt tests; 6.0% of failed tests for this model year.

Rear 21 failures ×13 6.0% of failed first tests Possible

Ball joint (front)

This failure pattern appears about 2.8× more often than on similar cars — recorded on 62 failed first-attempt tests; 17.7% of failed tests for this model year.

Front 62 failures ×2.8 17.7% of failed first tests Possible

No patterns met the strongest callout thresholds on this page; showing the highest-lift rows that still cleared the display floors.

# Fault pattern Location Failures vs similar cars Share of fails Confidence
1 Sub-frame (rear)
Suspension > Sub-frames > Sub-frame
 Rear 21 ×13 6.0% Possible
2 Ball joint (front)
Suspension > Suspension arms > Ball joint
 Front 62 ×2.8 17.7% Possible
3 Track rod end (front)
Steering > Steering linkage components > Track rod end
 Front 48 ×2.7 13.7% Possible
4 Rigid brake pipes (rear)
Brakes > Rigid brake pipes
 Rear 25 ×2.6 7.1% Possible
5 Linkage ball joints (front)
Suspension > Anti-roll bars > Linkage ball joints
 Front 27 ×2.1 7.7% Possible
6 Coil spring (rear)
Suspension > Springs > Coil springs > Coil spring
 Rear 26 ×2.1 7.4% Possible

Only patterns that clear minimum sample and elevation thresholds are shown (at least 20 failures and about 2.0× more often than similar cars).

Note: Rates and comparisons are among first-attempt failed tests, not all MOTs. Patterns come from MOT defect codes — not manufacturer service bulletins, recalls, or a diagnosis of any individual car. Failures and advisories are listed separately.

Advisories

Notes recorded at the test that appear more often than on similar cars.

Advisory notes recorded on failed first-attempt tests that appear more often than on similar cars.

# Advisory pattern Location Notes vs similar cars Share Confidence
1 Suspension arm (rear)
Suspension > Suspension arms > Suspension arm
 Rear 46 ×4.3 13.1% Elevated
2 Pins and bushes (rear)
Suspension > Suspension arms > Pins and bushes
 Rear 43 ×4.0 12.3% Elevated
3 Rigid brake pipes (front)
Brakes > Rigid brake pipes
 Front 47 ×3.5 13.4% Elevated
4 Suspension arm (front)
Suspension > Suspension arms > Suspension arm
 Front 21 ×3.4 6.0% Elevated
5 Exhaust system (rear)
Body, chassis, structure > Exhaust system
 Rear 34 ×3.3 9.7% Elevated
6 Sub-frame (rear)
Suspension > Sub-frames > Sub-frame
 Rear 80 ×3.0 22.9% Possible
7 Component mounting prescribed areas (rear)
Suspension > Component mounting prescribed areas
 Rear 29 ×2.6 8.3% Elevated
8 Rigid brake pipes (rear)
Brakes > Rigid brake pipes
 Rear 68 ×2.6 19.4% Possible
Note: Advisories are not a fail rate — they flag issues noted at the test, often before they become failures.

FAQs

Short answers about how to read this model-year guide.

We do not show a single reliability score for the 2007 Mitsubishi Outlander on this page. Among 350 failed first-attempt MOT tests (test year 2025), Sub-frame (rear) appears more often than on similar cars (about 13× more often than similar cars; 21 observed failures; 6.0% of failed tests). Treat this as a pre-purchase checklist from DVSA open data — not a guarantee for any individual car.
Among failed first-attempt tests we highlight patterns that appear more often than on similar cars. Top example: Sub-frame (rear) (about 13× more often than similar cars; 21 observed failures; 6.0% of failed tests). These are statistical signals, not a diagnosis of any individual car.
Sub-frame (rear) shows up more often than on similar cars (about 13× more often than similar cars; 21 observed failures; 6.0% of failed tests). That does not prove a design fault — age, mileage, and how the car was used still matter. Treat it as a pre-purchase check point, not a manufacturer service bulletin.
Common MOT problem areas for the 2007 Mitsubishi Outlander include Sub-frame (rear), Ball joint (front), Track rod end (front). These patterns show up more often than on similar cars after we filter out sparse noise — not a full list of every possible fault on an individual car.
Advisories flag issues noted at the test and are not a fail rate. We show advisory patterns that appear more often than on similar cars among failed first-attempt tests, separate from common failure rows. Use them as early-warning checks, not as a pass/fail score.
This page highlights MOT failure patterns for the 2007 Mitsubishi Outlander (registration year) using UK DVSA open data for the selected test year. Patterns are compared with cars of a similar age and mileage. It is a buyer checklist from MOT defect statistics — not a full service history or manufacturer service-bulletin list.
No. MOT tests do not cover engine internals, gearboxes, or many electronic modules. Patterns here come from MOT defect statistics only and should not be read as engine or gearbox reliability scores.
PRS means the car failed items that were fixed at the test station and then passed the same day. We count PRS as a first-attempt fail in headline rates so same-day repairs do not hide problems.

About this data

How this page is built and what it can (and can't) say.

These figures come from UK MOT open data for this model year. We surface common failure patterns against similar cars — not a full reliability score, and not a pass/fail verdict on any individual vehicle.

2024 2025

What we include

UK Class 4 cars only. Normal MOT tests (not retests); first test per vehicle per calendar year; results pass, PRS, or fail.

Same-day repairs

PRS means the car failed items that were fixed at the test station and then passed the same day. We count PRS as a first-attempt fail in headline rates so same-day repairs do not hide problems.

How we compare

We compare this model year with other Class 4 cars of similar age and mileage in the same test year. This model family is left out of the peer group so the car is not measured against itself.

What this does not cover

  • MOTs do not cover engine internals, gearboxes, or many electronics — this is not a full reliability score.
  • Common faults come from MOT defect stats, not manufacturer TSBs or recalls.
  • Age and mileage matching reduces — but does not remove — differences in how cars were used and maintained.
  • We never invent pass rates, star scores, or ranks when those data marts are missing.

Contains public sector information licensed under the Open Government Licence v3.0.

Most reliable Mitsubishi models

See brand-wide MOT rankings and year guidance for Mitsubishi (separate from this model-year report).